Backing up to a local destination, such as an external drive connected to your computer, is recommended when you are frequently using a device in areas that do not have Internet access, or when you frequently need to back up large quantities of data. This tutorial provides step-by-step instructions for backing up files to an external drive.
Watch the short videos to learn how to back up to an external drive. For more videos, visit the Code42 University.
CrashPlan for Small Business
Code42 for Enterprise
This article assumes you have permission to manage your backup destinations and add local destinations. Your administrator may prevent destination management or the ability to add local destinations.
Follow these instructions if you would like to back up the files to a folder on your device or external drive:
- Open the Code42 app.
- Navigate to Backup Set Settings:
- Code42 app version 6.8.3 and later:
- Select .
- Select Backup Sets.
- Code42 app version 6.8.2 and earlier:
- Select Details.
- Select the action menu.
- At Destinations, click Change.
- Select Add Local Destination.
The file browser for your device opens.
- Select the drive or folder you want to back up to.
The new drive appears in the list of available destinations.
- Select the local destination that you added.
- Click Save.
- (Version 6.8.2 and earlier) From Backup Set Settings, select Done.
The Code42 app begins backing up your file selection to the external drive.
You can disconnect external drives at any time, and for any length of time—the Code42 app won't delete files from your backup if the drive is disconnected. When you reconnect the drive, the backup resumes where it left off. If you reconnect the drive and the Code42 app doesn't recognize it immediately, it is likely because the drive letter or name changed. See the troubleshooting tips below to correct the issue.
If a drive becomes too full for the Code42 app to continue backing up to it, the Code42 app reports Out of space at destination. To continue backing up, you can either move the backup archive to a larger drive, or reduce the size of the archive.
Local backups are stored in the location you selected when adding the destination. They are stored in an encrypted archive format within a folder labeled with the 18-digit device ID that corresponds to your device.
Best practices (Windows)
When you connect an external drive to a Windows device, the operating system automatically assigns the next available letter in the alphabet. If the letter changes when you reconnect a drive you've been using for backup, the Code42 app won't recognize the drive. Consequently, we recommend assigning a static drive letter to your external drive.
Code42 app reports drive as "missing"
This issue occurs when the external drive is disconnected from the device or the letter or name assigned to the drive by your operating system changes. The Code42 app uses absolute paths when backing up. If the Code42 app cannot detect a drive at the specified location, such as when it is disconnected or when the name of a drive changes, it lists the drive as "Missing". You can correct the issue by reconnecting the drive or renaming the drive to match the original drive letter or name.
External drive stops backing up (Mac)
If an external drive stops backing up on a Mac, it is likely because the drive didn't unmount cleanly (for example, after a power outage, or disconnection without ejection). When this happens, the drive can leave behind a "ghost" folder in /Volumes, even though the drive is no longer mounted. When the external drive re-mounts to your device, the "ghost" folder name is already taken, so your device adds a “1” to the external drive's name. However, the Code42 app looks for a folder with the original name, and that folder belongs to a drive that appears to be no longer connected. Use our troubleshooting guide to diagnose and correct this issue.