Code42 supports backing up files that reside on network attached storage (NAS) on Mac and Linux. Storage must be mounted in order for the Code42 app to access it. This article provides information about mounting NAS on the supported operating systems.
- Code42 doesn't support backing up NAS on Windows. This is due to an operating system-level restriction built into Windows.
- A NAS device can stop backing up on a Mac if the device fails to mount properly. To remedy the problem, see External drive stops backing up on Mac (CrashPlan for Small Business).
- On Mac and Linux, the Code42 app can only back up files stored on a NAS when the file verification scan runs. The Code42 app doesn't support real-time backup on network-attached drives. The Code42 app backs up real-time file changes only on the device where the Code42 app is installed.
- Backing up files that reside on a NAS device results in slower backup performance because each data block must be translated into a network packet.
- If the NAS device is shared by multiple users, it increases the possibility of locked or open files. Locked or open files may not be backed up reliably. To minimize the number of these files, we recommend changing the default Backup changes every setting from 15 minutes to one hour and deselecting the Back up open files setting.
- The Code42 app can struggle to back up NAS devices containing many terabytes of storage. If the amount of data on your NAS device exceeds 1 TB, see Adjust Code42 app settings for memory usage with large backups (CrashPlan for Small Business).
- Code42 does not test NAS devices. Therefore, we cannot predict performance problems or other issues that may arise from use of particular NAS devices.
Mount the drive
On a Mac, NAS drives and other network drives must be mounted to your device in order for the Code42 app to access them. Consult your operating system documentation for information on mounting the drive to your device. If the drive is mounted, the left-hand pane of the Finder window shows the drive with an eject arrow next to it. After the drive is mounted, add files and folders on the networked drive to your file selection.
Automatically mount the drive upon login
If you have a NAS drive that you want to back up or use as a backup destination, set it to automatically mount each time you sign in to the computer.
- Open System Preferences.
- Select Users and Groups.
Older versions of Mac operating systems may list this as Accounts.
- Select Login Items.
- Click + to add an item.
- In the Finder window that opens, select the mounted share.
- Add files and folders on the networked drive to your file selection.