Skip to main content

Who is this article for?

CrashPlan Cloud
CrashPlan for Small Business

Find your product plan in the Code42 console on the Account menu.
Not a CrashPlan for Small Business customer? Search or browse Incydr and Instructor or CrashPlan Cloud.

Instructor, yes.

Incydr Professional, Enterprise, Horizon, and Gov F2, no.

Incydr Basic, Advanced, and Gov F1, no.

CrashPlan Cloud, no.

Retired product plans, no.

CrashPlan for Small Business, yes.

Code42 Support

Connection shows network blocked (CrashPlan for Small Business)


The Code42 app displays a Network blocked–Backup will resume automatically on approved networks message when configured to block specific network connections. This article includes instructions for unblocking the Code42 app's access to available networks.


If the only available networks are blocked, then the backup status displays as Network blocked - Backup will resume automatically on approved networks.


Recommended solution

Follow the steps below to prevent the Code42 app from blocking certain wireless networks and network interfaces for backup.

  1. Open the Code42 app.
  2. Select settings button Settings.
  3. Select Network.

Network preferences

  1. Next to Wireless network exclusions, select Change.
  2. Select a wireless network from the list that you want to allow for backup.
    Wireless network exclusions
  3. Select the minus (-) to allow the wireless network.
  4. Repeat for each wireless network you want to allow.
  5. Click Save.
  6. Next to Network Interface Exclusions, click Change.
  7. Select a network interface from the list that you want to allow for backup.
    Network interface exclusions
  8. Select the minus (-) to allow the network interface.
  9. Repeat for each network interface you want to allow.
  10. Click Save.
  11. Close the Device Prefrences dialog.
  12. Verify the Network Blocked message no longer displays on the backup dialog.
  • Was this article helpful?