Who is this article for?
Incydr Professional, Enterprise, Gov F2, and Horizon, no.
Incydr Basic, Advanced, and Gov F1, no.
CrashPlan Cloud, no.
Retired product plans, yes.
CrashPlan for Small Business, no.
Backing up devices to a remote storage destination for the first time can require excessive amounts of network bandwidth. To increase efficiency, you can create the initial backups at a local destination, then transfer (or "seed") the archives to the remote location on a portable drive. Endpoint devices then connect to the remote destination and resume backing up, but consume significantly less bandwidth because they are only transporting changes, not entire files.
You can also use seeding to transfer archives from one store point to another if, for example, a storage server fails and you must move archives to a new store point.
- You can only seed archives if your Code42 environment uses the on-premises architecture. If your Code42 environment uses managed appliances, contact your Customer Success Manager (CSM to engage the Code42 Professional Services team to seed archives.
- Seeding is intended primarily for a device's initial backup. The seeding process completely overwrites any data previously backed up for each device used in the seeding process.
- You can seed archives between any store point in your Code42 environment, regardless of the storage server or destination. Cross-destination seeding requires that you first offer the target destination to the organization in which the user resides.
- When copying backup archives, always verify the copy operation using checksums or another verification method.
- Only users with the admin.system.command permission are allowed to configure the seeding settings described in this article. The following default user roles contain this permission:
- When seeding and reviving an archive, the archive's organization and user must be active (not deactivated). If the organization and user for that archive are deactivated, the seed and revive process fails.
How seeding works
Seeding uses an existing archive from one destination to back up to a second destination. The first destination is usually a local destination, such as a local Code42 server or an external hard drive attached to the device. The second destination is usually a remote Code42 server.
Store point seeding directories
Administrators place an archive in one of two seeding directories that reside on each store point inside the store point's path. Both directories process active archives in the same way, but they process deactivated archives differently:
- CrashPlanArchive_REVIVE reactivates deactivated archives.
- CrashPlanArchive_SEED does not reactivate deactivated archives.
The Code42 server periodically checks each store point for archives in these seeding directories. When the Code42 server finds archives in the seeding directories, it:
- Moves the archives to the main archive storage directory on the store point. Archives are moved, not copied.
- Performs archive maintenance on the archives.
- Reactivates any deactivated archives in the CrashPlanArchive_REVIVE directory.
Locate the seeding directories
The seeding directories are located inside the path of each store point. To locate the seeding directories on any store point:
- Sign in to your Code42 console.
- Navigate to Storage > store points.
- Select the store point.
- Note the directory listed as the Path:
Default store point locations
- Linux: /var/opt/proserver/backupArchives
Applies to Code42 servers installed as root on Ubuntu
- Windows: C:\ProgramData\PROServer\backupArchives
Before you begin
Before you begin the seeding process, verify that:
- The seeding destination has enough space for all the seeded backup archives
- The seeding destination is offered to the devices you are seeding
Step 1: Prepare seeding notifications
- Sign in to the Code42 console on the Code42 server that you want to seed to.
- Specify an email address to receive notifications of seeding success or failure:
- Double-click the logo in the upper-left corner of the Code42 console to open the Code42 console CLI.
- Set the
c42.seed.emailproperty by issuing the following command:
prop.set c42.seed.email email@example.com save
Step 2: Copy the seed archives
- Create the seed archives by backing up the devices to a local destination.
The local destination is any destination whose file system you can access, such as an external hard drive, another device, or a Code42 server.
- (Optional) At the remote destination, create a staging directory for seeding to avoid any accidental operation on the active archive. Prepare the staging directory on the same volume as the seeding directories.
- Stop backups on the local destination.
- External hard drive or another device: Stop the Code42 service. See Stop and start the Code42 app service for details.
- Code42 server: Pause incoming backups from the device via the Code42 console. See the Devices reference for details.
- Copy the seed archives from the local destination to the staging directory on the remote destination.
- Start backups on the local destination.
- External hard drive or another device: Start the Code42 service. See Stop and start the Code42 app service for details.
- Code42 server: Resume incoming backups from the device via the Code42 console. See the Devices reference for details.
- Move the seed archives into one of the two seeding directories below:
- Wait for the Code42 server to process the seeded archives.
It may take up to 10 minutes for the Code42 server to begin moving the archives from the seeding directory to the main archive storage directory.
Step 3: Confirm seeding success
Navigate to Devices in the Code42 console to view the seeded devices, confirming that the seed process is complete.