Skip to main content

Who is this article for?

Code42 for EnterpriseSee product plans and features
CrashPlan for Small Business 

CrashPlan for Small Business, no.

Code42 for Enterprise, yes.

Link: Product plans and features.

This article applies to version 6 and later.

Other available versions:

Version 5Link: What version am I on?

Code42 Support

Slow restores due to small network buffer size

Who is this article for?

Code42 for EnterpriseSee product plans and features
CrashPlan for Small Business 

CrashPlan for Small Business, no.

Code42 for Enterprise, yes.

Link: Product plans and features.

This article applies to version 6 and later.

Other available versions:

Version 5Link: What version am I on?

Overview

This article describes a known issue that can negatively impact restore speeds when users restore files via the Code42 app or when administrators initiate a device restore from the administration console. Following the steps below to increase the TCP/IP buffer size may help greatly improve restore speeds in your Code42 environment.

Affects

On-premises Code42 environments where the Send and Receive buffer sizes in Settings > Device Backup > Network > Advanced TCP/IP are too low. The most common low value is 64 KB, but anything other than the OS Default could negatively impact restore speeds.

There are two reasons the buffer sizes can be too low:

  • Prior to Code42 server version 3.6.3 (released in early 2014), the default buffer sizes were automatically set to 64 KB. If you used a Code42 server version older than 3.6.3 and have continued upgrading to newer versions, the old default settings may still be in use.
  • In the administration console, an administrator manually changed the buffer sizes to a value that is too small.

Recommended solution

To increase the TCP/IP buffer sizes and improve restore speeds:

  1. Sign in to the administration console.
  2. Select Settings > Device Backup.
  3. Select Network.
  4. Go to the Advanced TCP/IP section.

Advanced TCP IP  Buffer Sizes

  1. Select OS Default for both the Send and Receive buffer size.
    Selecting a value other than OS Default is recommended for experienced network administrators only. Incorrectly configuring these settings can adversely affect network performance and impact Code42 app connectivity.
  2. Click the push icon Push settings icon for both settings.
  3. Click Save.
  4. On each user device, restart the Code42 service, or restart the entire device.
  • Was this article helpful?