Who is this article for?
CrashPlan for Enterprise, yes.
Code42 for Enterprise, yes.
CrashPlan for Small Business, no.
This article applies to on-premises authority servers.
This article explains how to interpret and respond to the following alert.
The table below displays where the alert appears and where it can be configured.
|"Problem with connection to RADIUS server: server name"||Delivered by email and to the Alerts Overview of the Code42 console|
|"RADIUS connection problem"||Settings > Notifications of the Code42 console|
Warning - although this alert indicates a serious issue that should be addressed, it does not pose an immediate risk of data loss, security breach, or service interruption. If the problem is not corrected, however, more severe problems could occur.
This alert is triggered when an authority server is unable to connect to the configured RADIUS server. The alert provides the hostname or IP address of the affected RADIUS server.
- Users unable to authenticate via RADIUS
- Users unable to backup or restore
Before you begin
You should have an understanding of the RADIUS networking protocol.
To resolve this alert:
- Go to Settings > Security > RADIUS and validate the RADIUS server settings
- Verify that the RADIUS server is powered on
- Verify that the RADIUS server is reachable from the command line of the authority server
- Confirm that the RADIUS server responds on the configured port using telnet and ping
Acknowledge the alert
An alert appears in the Code42 console's list of active alerts until someone dismisses it. To dismiss an alert:
- (Version 6.5 and later) Go to Active Alerts, select the alert, then go to the action menu and choose Dismiss.
- (Before version 6.5) Go to Alerts Overview, select the alert, then go to the action menu and choose Acknowledge.