Who is this article for?
CrashPlan for Enterprise, yes.
Code42 for Enterprise, yes.
CrashPlan for Small Business, no.
This article applies to on-premises authority servers.
This article explains how to interpret and respond to the following alert.
The table below displays where the alert appears and where it can be configured.
|"Provider destination destination name stopped accepting application application name."||Delivered by email and to the Alerts Overview of the Code42 console|
|"Provider destination stopped accepting application."||Settings > Notifications of the Code42 console|
Low - this alert indicates a condition that should ideally be corrected, although it does not pose an immediate threat to user data, system security, or service availability.
Archives that are no longer accepted by the provider storage destination are immediately removed and cannot be recovered.
Contact your storage provider about the configuration change.
Acknowledge the alert
An alert appears in the Code42 console's list of active alerts until someone dismisses it. To dismiss an alert:
- (Version 6.5 and later) Go to Active Alerts, select the alert, then go to the action menu and choose Dismiss.
- (Before version 6.5) Go to Alerts Overview, select the alert, then go to the action menu and choose Acknowledge.