Who is this article for?
CrashPlan for Small Business, no.
Code42 for Enterprise, yes.
Link: Product plans and features.
This article applies to on-premises authority servers.
The Code42 managed appliance boots into the command line. The command line provides basic configuration tools and Linux commands for troubleshooting.
Press TAB twice to display all available commands.
|apt-retrieve-credentials||Retrieve credentials and set up via code42.cfg|
|apt-submit-credentials ||Generate a unique password and upload credentials|
|clear||Clear the command screen*|
|date||Display the current date and time*|
|df||Display available disk space on the filesystem*|
|factory-defaults||Completely removes the contents of the code42.cfg|
|firewall on||Enable iptables firewall rules set within /etc/iptables/rules.v4|
|firewall off||Disable iptables firewall rules set within /etc/iptables/rules.v4|
|free||Display total free and used physical and swap memory, and buffers used by the kernel*|
|history||Display the recent commands executed*|
|hostname||Display the system's hostname*|
|iostat||Displays the current CPU load average and disk I/O utilization, providing a great way to monitor your disk I/O usage*|
|ipmi-factory-defaults||Reset IPMI settings to factory defaults|
|ipmi-password||Set an IPMI password|
|ipmi-reload||Re-issues IP/DHCP/networking configuration commands from the code42.cfg to the IPMI|
|ipmi-reset||Reboots the IPMI interface|
|Configure the IPMI network settings|
|last-known-good||Reverts to a previously set known good configuration|
|lsicmd||Display drive status|
|netstat||Print information about the Linux networking subsystem*|
|ntpdate||Set the local date and time by polling the Network Time Protocol (NTP) given as the server arguments to determine the correct time*|
|ping||Use to check that there is a network communication to another computer*|
|poweroff||Shut down the appliance*|
|ps||Give a snapshot of the current processes*|
|reboot||Reboot the system*|
|restart-networking||Restarts networking, applying network changes|
|set-ipmi||Configure the IPMI network settings|
|set-monitoring||Configure the server to contact for monitoring|
|set-net||Run the network configuration wizard|
|set-tz||Run the time zone configuration wizard|
|show-all||Display all configuration settings|
|show-ipmi||Display all IPMI devices|
|show-net||Display network configuration settings|
|show-raid||Display virtual drive info|
|show-serial||Display the serial number of the managed appliance|
|show-version||Display appliance, CLI, and Pepper version numbers|
|silencealarm||Silence any audible alarms, such as a failed drive alarm|
|tcpdump||Analyzes TCP/IP and other packets transmitted or received by a network*|
|top||Display the top CPU processes*|
|traceroute||Print the route that packets take to the network host*|
|uptime||Display how long the system has been running*|
|w||Displays the users currently logged in, and lists their running processes*|
* - indicates this command is a native Linux command. For full information on Linux commands, please view the command's man page. Note that man pages are not installed on the managed appliance operating system.