Skip to main content
Code42 Support

Powering On Or Off A D1, M1, Or S2 Series Server Using The iDRAC Web Console

Available in:

  • CrashPlan PRO
    • Standard
    • Premium
    • Enterprise
Applies to:

Overview

This article describes how to safely power on and power off a Code42 D1, M1, or S2 series server using the iDRAC web console.

Before you begin

Have the following available:

  • Web browser access
  • iDRAC IP address
  • iDRAC username and password

Power on the server

  1. Enter the iDRAC IP address into a web browser to access the iDRAC console window.
  2. Enter your Username and Password.
  3. Click Submit.
    iDRAC login screen
  4. In the Server section of the left navigation pane, click Power/Thermal.
  5. Select Power On System and click Apply.
    iDRAC power on screen
  6. On the Warning dialog, click Yes.
    iDRAC warning screen
    The server powers on.
  7. Click Logout in the upper-right corner of the iDRAC web console.

Power off the server

  1. Enter the iDRAC IP address into a web browser to access the iDRAC console window.
  2. Enter your Username and Password.
  3. Click Submit.
  4. In the Server section of the left navigation pane, select Power/Thermal.
  5. Select Graceful Shutdown and click Apply.
    iDRAC graceful shutdown screen
  6. On the Warning dialog, click Yes.
    iDRAC warning screen
    The server powers off.

  7. Click Logout in the upper-right corner of the iDRAC web console.

  • Was this article helpful?