Skip to main content

This article applies to Code42 CrashPlan version 5.

Other available versions:

Version 6 | Version 4icon.qnmark.png

Code42 Support

Code42 server does not restart after Linux reboots or upgrades

This article applies to Code42 CrashPlan version 5.

Other available versions:

Version 6 | Version 4icon.qnmark.png


If your Code42 server does not restart when its Linux machine reboots or upgrades, follow these instructions to determine whether a new or revised restart script will solve the problem. If so, follow the instructions to create a Code42 server restart script in /etc/systemd/system/proserver.service or to modify the existing script at /etc/init.d/proserver.


Code42 servers installed on Linux as the root user (the default). When Linux reboots, the Code42 server fails to restart. Or a Linux upgrade process reports an error.

Unsupported process
The information presented here is intended to offer information to advanced users. However, Code42 does not design or test products for the use described here. This information is presented because of user requests.

Our Customer Champions cannot assist you with unsupported processes, so you assume all risk of unintended behavior. You may want to search our forums for information from other users: Code42 CrashPlan use the Code42 customer community and CrashPlan for Small Business use the support forum.


A Code42 server writes its restart script to a file in /etc/init.d, a long-time standard for Linux systems. Two Linux variations require a new or revised script:

No systemd script

Some Linux systems (see the list below) look for restart scripts in /etc/systemd rather than /etc/init.d. To make those systems restart a Code42 server when they reboot, you need to create a restart script at /etc/systemd/system/proserver.service.

Linux distributions that implement systemd:

  • CentOS 7.14.04, April 2014
  • Debian v8, April 2015
  • Fedora v15, May 2011
  • openSUSE 12.2, Sept. 2012
  • Red Hat Enterprise Linux (RHEL) 7.0, June 2014
  • SUSE Linux Enterprise Server v12, Oct. 2014
  • Ubuntu 15.04, April 2015

For details see this Wikipedia article on systemd.

Non-compliant init.d script

In addition, some Linux systems that use init.d scripts, or both systemd and init.d, require compliance with a standard called Linux Standard Base (LSB). To meet that standard, you need to add some header information to the file /etc/init.d/proserver.

Failed upgrade due to non-LSB compliance of systemd
If you have only a systemd script, then upgrades may fail because the upgrade process cannot run the init.d script to stop the Code42 server before proceeding. Therefore, if you have a failed upgrade, try making the /etc/init.d/proserver file LSB-compliant.
Users have reported LSB problems on these Linux distributions:

  • CentOS
  • Debian
  • Red Hat Enterprise Linux (RHEL)
  • Ubuntu

Diagnose and solve

A Code42 server may fail to restart after its Linux machine reboots for either or both of the causes described above.
Follow the instructions in the order presented below to:

  1. Determine whether your Linux machine uses systemd.
    If it does, install the systemd script, then reboot the Linux machine.
    If your Code42 server restarts, the problem is solved.
  2. Determine whether your Linux distribution requires LSB compliance.
    If it does, edit the init.d script.

Note that an LSB problem may not show up until after a systemd problem is solved and you reboot the system.

Verify and use systemd

Determine whether your Linux machine uses systemd

At the Linux command line, enter the command:

sudo stat /proc/1/exe | head -1

If the command returns a reference to a systemd directory, as in the example below, then your Linux distribution does use systemd to manage services. Proceed with Install the systemd script, immediately below.

>$ sudo stat /proc/1/exe | head -1
>$ File: '/proc/1/exe' -> '/usr/lib/systemd/systemd'

If your Linux distribution does not use systemd, skip ahead to Diagnose and implement LSB compliance.

Install the systemd script

  1. Copy the script below into a new file /etc/systemd/system/proserver.service

Description=Code42 Server

ExecStart=/opt/proserver/bin/proserver start
ExecStop=/opt/proserver/bin/proserver stop


  1. Edit the file paths in the script, if necessary.
    The script above points to the default paths. Only a nonstandard installation needs changes to the script.
  2. At the Linux command line, enter two commands:
    sudo systemctl daemon-reload
    sudo systemctl enable proserver.service
  3. Verify that the second command returns results that report creating the symlink:
Created symlink from /etc/systemd/system/ to /etc/systemd/system/proserver.service
Do not create the symlink manually; that may lead to problems of ownership and privileges.
  1. Restart your Code42 server with the new proserver.service script. The command is:
    sudo systemctl restart proserver.service
  2. Reboot your machine with this command:
    sudo shutdown -r now
  3. Test whether the Code42 server restarted with this command:
    sudo systemctl status proserver.service
    If the Code42 server restarts, the problem is solved. Your work is done.
    If the Code42 server does not restart, proceed with Diagnosing And Implementing LSB Compliance.

Diagnose and implement LSB compliance

Determine whether your Linux machine requires LSB compliance

Search through your system logs using a command like the following:

sudo grep -r proserver /var/log/*

Look for a message like this one:

insserv: warning: script 'proserver' missing LSB tags and overrides

If you find such a message, edit the existing init.d script to comply with the LSB standard.

Edit init.d script to comply with LSB

  1. Open /etc/init.d/proserver with a text editor.
  2. Copy the following 13 lines to the top of the file.

# Linux Standard Base comments
# Provides: proserver
# Required-Start: $local_fs $network $remote_fs
# Required-Stop: $local_fs $network $remote_fs
# Should-Start:
# Should-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: PROserver service
# Description: PROserver service

  1. Reboot your machine with this command:
    sudo shutdown -r now
  2. Verify that the Code42 server restarted by connecting with a web browser, or with a command like the following:
    service --status-all
    If the Code42 server does not restart, contact our Customer Champions for Code42 CrashPlan support.
  • Was this article helpful?