Skip to main content
Code42 Support

Device Default Network Reference

Applies to:
  • CrashPlan PROe

Overview

Use the settings from Settings > Devices > Network to control connection performance settings over LAN and WAN, exclude wireless networks, exclude network interfaces or configure proxy settings.

General

Device Network Settings

Item Description
a WAN With default settings, WAN rules apply if a device is restoring from or backing up to a destination with a routable IP address. Override the default settings by specifying Network overrides (h).
b LAN With default settings, LAN rules apply if a device is restoring from or backing up to a destination with a non-routable IP address. Override the default settings by specifying Network overrides (h).
c Limit sending rate when away to Bandwidth setting when you are not using your computer. Backup and restore will be slower at lower bandwidth settings. Setting sending rate limits to None means no throttling takes place.
Note: In Linux, the CrashPlan app always uses the "away" setting
d Limit sending rate when present to
Windows and Mac only
Bandwidth setting when you are working at your computer. Backup and restore will be slower at lower bandwidth settings.
e Sending message buffer size Size of outbound buffer for WAN and LAN. Expert users only!
f Receiving message buffer size Size of inbound buffer for WAN and LAN. Expert users only!
g TCP Packet QoS (Advanced - must have QoS capable router configured) Choose the TCP Packet quality from the list: Low, Normal, Reliability, Throughput or specify a DSCP value.
h Network overrides

Override the default WAN and LAN definition and add your own network range(s) to the WAN and LAN definitions. Format using IPv4 CIDR notation (e.g. 192.168.1.0/24).
Example use case: Specify your VPN network range to always use WAN settings to throttle backups and restore occurring over the VPN.

i Lock Locks this setting to prevent users from changing it in their personal settings.
j Push Applies this setting to existing devices in addition to new devices.

Proxy

setting.device.network.proxy.png

Item Description
a Enabled Enables Network Proxy
b PAC URL

URL or file path of your Proxy Auto-Config (PAC) file.

c Lock Locks this setting to prevent users from changing it from the CrashPlan app
d Push Applies this setting to existing devices in addition to new devices

Excluded Network Interfaces

settings_device_default_network_interfaces.png

Item Description
a - Enter interface that you want to exclude via a regular expression
b + Adds text in text box to list of network interfaces to exclude
c - List of interfaces to exclude
d Import Displays window in which you can paste the contents of a text file of network interfaces you wish to exclude
e Export Displays window from which you can copy the contents of the excluded network interfaces list, which you can in turn paste into your favorite text editor for editing
f Lock Locks this setting to prevent users from changing it from the CrashPlan app
g Push Applies this setting to existing devices in addition to new devices

Network interfaces are excluded only on Mac and Windows devices.

Excluded Wireless Networks

device-defaults-network-wireless.png

Item Description
a - Enter wireless network SSID that you want to exclude via a regular expression
b + Adds text in text box to list of wireless network SSID to exclude
c - List of wireless networks to exclude
d Import Displays window in which you can paste the contents of a text file of wireless network SSIDs you wish to exclude
e Export Displays window from which you can copy the contents of the wireless network SSID list, which you can in turn paste into your favorite text editor for editing
f Lock Locks this setting to prevent users from changing it from the CrashPlan app
g Push Applies this setting to existing devices in addition to new devices

Wireless networks are excluded only on Mac and Windows devices.

Advanced TCP/IP

Feature available beginning with version 3.6.3.

This section is intended for advanced users only. This explanation of buffer sizes may be helpful when configuring this setting.

Advanced TCP/IP Settings

Item Description
a Send buffer size Socket buffer size used for sending data
b Receive buffer size Socket buffer size used for receiving data
c OS Default Use the buffer size that is the default for your operating system
d _____ KB Use a custom buffer size, given in KB
e Lock Locks this setting to prevent users from changing it from the CrashPlan app
f Push Applies this setting to existing devices in addition to new devices